 |
|
|
Model HP - NFPA High Pressure Hydraulic Cylinders |
|
|
"Threaded Male Stud Piston Rod End /R" |
|
By selecting a Threaded Male Rod End Stud in our configurator you will automatically receive a threaded stud that contains a NFPA short male thread on the piston rod of the cylinder that you have configured. Once configured, the part number for your cylinder will have a /R at the end of the cylinder ordering number which designates this threaded male rod end stud feature and a "F" will appear after the rod diameter within the cylinder part number. Our threaded male rod end stud can only be ordered through this configurator with a NFPA “Short Male” thread. Should you want another thread pitch for the threaded male stud feature please contact Peninsular at (800) 526-7968 in the USA or Canada or at (586) 775-7211 and we will accommodate your request.The only way to order another male piston rod end thread pitch (with a threaded rod end stud) other than the NFPA short male thread through our configurator is to contact Peninsular at (800) 526-7968 in the USA or Canada or at (586) 775-7211. There are pros and cons associated with the use of piston rod end-threaded male studs. Piston rod end studs are sometimes preferred because in the event of a rod thread breakage, the stud can be easily removed and replaced without replacing the entire piston rod assembly. Should you require any additional information on this subject please contact us at (800) 526-7968 in the USA or Canada or at (586) 775-7211. You may also e-mail us at sales@peninsularcylinders.com.
|
|
Illustration of a Threaded Male Stud Piston Rod End |
|
|
|
Toll Free: 800-526-7968 Phone: (586)
775-7211 Fax: (586) 775-4545 |
